FixKorea

iPhone 8 stuck on Apple logo with an unresponsive home button? Why and how? Different from previous versions, there is a built-in hardware detection during booting process for iPhone 8. Once touch ID gets malfunctioned, the phone will hang on Apple logo during startup and therefore won't turn on. If you are troubled with the same problem that iPhone 8 can not be activated, check this video for the solution!

It is widely reported that iPhone 8/X glass back is very difficult to repair and costs even more than screen replacement. REWA here released a new and quicker solution to repair the iPhone X/8 broken back glass cheaply and high efficiently with the combination of dispergator and ultrasonic cleaner. Compared with traditional heating solution which takes more than 2 hours to separate the glass, REWA's new solution will cost you only 10 minutes! Let's check the video for iPhone 8 back glass refurbishing demo.

This video will show one method for replacing a damaged antenna connector from an iPhone logic board. This is a simple approach using a microscope, soldering iron, ,multimeter, and tweezers. It is also possible and easier to do this with hot tweezers or a hot air rework station.

Essential Phone Teardown Repair Guide Steps:
Step 1
• Power down your Essential Phone.
Step 2
• Eject the Nano SIM Card Tray.
Step 3 (Essential Phone Display Assembly)
• The 5.71-inch Essential Phone display assembly is glued on solidly and is a tight fit within the frame. Apply heat to soften the adhesive.
• With the precision knife create enough space to insert a playing card.
• Use the playing card to slice and pry through the adhesive and carefully decouple the screen from the phone.
• The display assembly is still connected to the Essential Phone, so don’t try to remove it entirely just yet.
• Remove the following 2 Phillips screws securing the display cable.
• Detach the cable from motherboard and free the Essential Phone LCD panel.
Step 4 (Essential Phone Midframe Shield and Battery)
• Remove the following 8 Phillips screws.
• Lift the flexible Essential Phone midframe shield to reveal the internal components.
• Remove the following Phillips screw and small metal bracket.
• Disconnect the Essential Phone battery cable.
• Locate the two peel-to-remove adhesive tabs at the top of the Essential Phone battery. Grab the first tab and try to keep the adhesive strip flat and wide.
• Slowly and gently pull each strip up and away from the phone. The strips will stretch to many times the length of the battery- keep pulling until they come out from between the battery and the rear case.
• And just like that, out comes the 3040 milliampere-hour (mAh), 4.4-volt battery.
Step 5 (Essential Phone Motherboard)
• Remove the following 9 Phillips screws and the small brackets they secure in place.
• Remove the small piece of tape covering the loudspeaker cable connector.
• Use the flat end of a spudger to flip the tab on the ribbon cable ZIF connector upward. Pull the loudspeaker cable straight out of the ZIF connector.
• Detach the remaining cables from the Essential Phone motherboard.
• Carefully pry the massive motherboard up and out of the rear case.
Step 6 (Essential Phone Dual Rear-Facing Camera, and Front-Facing Camera and Earpiece Speaker Assembly)
• Remove the following 2 Phillips screws.
• Extract the highly touted dual 13-megapixel Essential Phone rear-facing camera module.
• Remove the small rubber gasket and then spudge up the front-facing sensor cable.
• Remove the following Phillips screw.
• The 8-megapixel front-facing camera and earpiece speaker come as a single part. Use the spudger to free the assembly from the strip of glue securing it to the rear case.
Step 7 (Essential Phone Vibrator and Loudspeaker)
• Remove the following Phillips screw and then de-cap the vibrator.
• Tweeze out the standard pancake style vibrator.
• Remove the following Phillips screw.
• Easily extricate the sprawling loudspeaker and accompanying contact cable.
Step 8 (Essential Phone Power and Volume Button Cable)
• Remove the following 4 Phillips screws.
• Use the tweezers to lift out the Essential Phone power and volume buttons cable.
* To reassemble your device, follow the steps in reverse order.

iPad 2 3G model number A1397 CDMA icloud removal
keywords:
iPad 2 icloud remove
iPad 2 3G icloud bypass
iPad 2 icloud removal hardware
iPad icloud bypass
iPad icloud removal
iPad icloud activation bypass
iPad 2 icloud unlock

This video is about how to increase the internal storage (memory)of iPhone6 16GB to 128GB by changing HDD (flash chip) .
This is iPhone6 16gb and i am converting it into 128gb by replacing HDD (flash chip)you need a new HDD (flash chip) and the serial number reprogramming tool(WL 64bit serial number changer )
Has you know the serial number is programmed in HDD (flash chip)so we need to reprogram the old serial number in new HDD (flash chip)after replacing the HDD (flash chip)we need to restore the phone because the new HDD (flash chip)is empty it doesn't have IOS .so connect to iTunes and restore it. then it turn into 128 gb
NOTE:
In this process phone will lose it's data. so it's better to take back up before you replace HDD (flash chip) it may have high possibility of brick your phone.this work should done only professional technicians.

Samsung Galaxy J7 Pro Repair Parts

iPhone X Screen Repair Guide, Phone Repair

iPhone 7 disassembly and water damage cleaning
keywords:
iPhone 7
iPhone 7 water damage
iPhone 7 disassembly
iPhone 7 teardown
iPhone 7 professional teardown
iPhone 7 water proof

Bey Sarch Leak Muk , Chinese movie, speak khmer, New movie, full movie, Chinese Movies

iPhone 6s not turning on fixed by replacing U2

iPhone 6 keeps searching for signal? There are many possibilities for the causes of iPhone showing "searching" issue.You may try to figure it out by replacing a new SIM card, restarting the phone or resetting the network. What if these do not work? This video introduced a logic board solution to fix iPhone 6 constantly searching for network. Let's check the video for the detailed tutorial.